Cold working of metals is performed at or near room temperature so that the advantage of reduced yield strength, or forging pressure, accompanying elevated temperatures is not available to assist in the forming operation. Additionally, metals “work harden”, i.e., increase in yield strength, during deformation at lower temperatures, further adding to the work necessary to reach the desired shape.
The appeal of cold forming, in addition to the obvious cost savings when no heating is necessary, is the greater dimensional precision that can generally be achieved since there is no need to account for thermal contraction or distortion once the shaping is completed. And often just as important, the cold-worked metal part also avoids the surface discoloration (oxidation) that occurs at higher temperatures, so that the part may be presentable for sale and possibly service without further processing.
The disadvantage to this process is that extremely hard (60 Rockwell C), highly abrasion-resistant die steel is required to endure cold working demands. With such an emphasis on abrasion resistance, the high hardness die steels are generally very brittle. The selection of cold working die steels offered by A. Finkl & Sons Co. are “mild” grades that provide some degree of fracture toughness over an exclusive focus on abrasion resistance.
|FINKL COLD WORK MOLD STEEL|
|Durodi||Lower carbon (C .50%) and higher nickel than most cold-working die steel for better fracture toughness. Suitable for mild cold-forming operations where die cracking is a chronic problem. Oil hardening.|
|DRX||S7||(AISI S7) Lower carbon (C .50%), moderate alloy for improved wear resistance, but with a focus on mechanical “Shock” resistance. Air hardening.|
|A2||A2||One of the most widely used cold-work tool steels. Moderate carbon (C 1.00%) and alloy for a balanced combination of wear and fracture strength. Air hardening.|
|D2||D2||Higher carbon (C 1.50%) and alloy for wear-prone applications. Good Nitriding response if additional wear resistance is needed. Air hardening.|
We SEASKYTOOLING normally purchase the FINKL cold work steel in(FINKL steel seller in China).